lift-sliding parking system 1800kgs per carport

Model

Capacity

Total height

Minimum height

Total Width

Drive Through width

Motor

Certification

?

WOWPSH

(1and2)

1800kg

7852mm

128mm

12450mm

1850mm

380V/220V

2.2KW

?

CE

4000lb

298.5inch

5.0inch

490.2inch

72.8inch

220V/110V

2hp

MHS²

Customers worldwide are looking for a new lift that can be simple and reliable while still be able to meet or exceed all industry standard and market requirement. As your long term partner and a world class lifting solution provide, JIG is proud to announce MHS²?lifting technology.
Muti-channel Hydraulic Synchronization and Safety system by incorporate hydraulic synchronization, hydraulic safety lock, Muti-channel cross backup technology can bring you.

Lower ownership cost

Thanks to the hydraulic direct drive structure and hydraulic balance system, by eliminating moving parts like balance cable & pulley, lifting chain and roller or spindle & nut all moving parts remain in the lift will be self maintain cylinders and power pack. This can save user tremendous amount of cost which after years of use may far exceed the cost of the lift itself.
Due to the ultimate safety protection of MHS2, mechanical safety and unlocking device is no longer needed.
Cable and chain are removed. MHS2 also doesn't request slack detection device. All those adding together make it possible for a simple electrical control circuit which request 70% less parts, connectors and wires. Which means less possibility for malfunction and repair. With a simple structure? and electrical design, installation time can be reduced to 1/3 of what a traditional lift would need.

Ultimate safety

Thanks to Bosch Rexroth parachute valve build in to cylinder system, full time full cycle protection is given at a real-time miner. Even under a unlikely event that any part of the Dual or muti-channel cross balance system damaged or dysfunction, the spare channel can always protects your safety as you expected

Comfort to use

Mechanical lock used on traditional hydraulic lift request rise before unlocking. This created confusion for many users who had mechanical lift before. Also under a limited roof height, this will cause lost of working height many people need. MHS²bring hydraulic safety lock in to lifting equipment, so lift can be lowered with full protection at any position without need of revising. When electrical power supply failure happened, a traditional hydraulic lift will need extra equipment like hand pump or jack to be able to unlock and lower down. Mechanical lift will need even more works to retrieve raised car. With MHS²?unique emergency lowering device, your will be able to manage lower down the lift without any extra works.

CCC

CCC column formed two closed areas at back of the post which gives it 1/3 more strength against torsion force when compare with regular designed columns. Specially when vehicle loaded unevenly, CCC columns give you extra protection.

Carriage

Longer distance between sliders can greatly lower pressure which affects slider and post. Together with UHMW material, minimized maintenance needed for the lift.

Arm & Pad

By changing pad material from regular rubber to space age ADU plastic, life time has been increased by as much as 5 times when lifting certain vehicles with sharp edges under lifting point With standard screw up pad, TPL can service most of vehicles. Optional low profile adopter can meet specific need of sports car or cars with aero dynamic kit. For body chassis frame construction vehicle like SUV or pickup truck, optional truck adopter can have lift to easily reach designed lifting point without damage vehicle body.

Uni-symmetrical

Uni-symmetrical design with 4 X 3 stage arm can very well service both cars and trucks.

Intergration

By integrate power pack, control box on master column, not only give lift a clean, professional outlook, but also makes it possible for factory pre- installation of power pack and electrical system. Great amount of installation time can be saved